More and more people are switching from cars to bicycles in everyday life and are recognising the bicycle as a practical means of transport for getting to work or shopping. The mobility shift away from the car to the bicycle is not only an issue for urban mobility. In rural areas, too, more and more people are using bicycles or e-bikes, thus ensuring a liveable environment. For over 20 years, we have been supporting an environmentally friendly mobility shift by also offering our Shopper® for use as a Shopper® on a bicycle. The Shopper® can be quickly coupled and uncoupled via a specially developed coupling system consisting of a coupling and coupling pin. The use of the Shopper® as a bicycle trailer has a significant advantage over conventional cargo bikes or Cargobikes. The bicycle can still be used flexibly as a means of transport and the luggage carrier remains free for the use of child seats or bicycle bags. Since the bag and wheels can be easily removed from the Shopper®, it can be easily stored when not in use.

Two components for attachment to the bicycle

Andersen coupling systems are designed to fit as many bicycle types as possible. To attach the shopper to the bicycle, two components are needed:

 

 

Shopper with U Handle

[Coupling stud SH-1]

 Suitable for the following frame types:

               

The SH-1 coupling pin is a component of the Andersen Shopper Manufaktur Bike & Easy system. With the help of the SH-1 coupling pin, the shopper can be attached to the appropriate coupling. The coupling pin is attached between the two struts of the shopper handle at the corresponding pre-drilled point. The shopper can be coupled to or removed from the bicycle in a few simple steps. The coupling pin can also remain attached to the shopper during normal use without the bicycle. In this way, the shopper can be used either with or without the bicycle, as desired.

Please note: To attach the shopper to the bicycle, a coupling is required in addition to the coupling pin.

 

  

Shopper with 3-Way-System Grip

[Coupling stud SH-2]

 Suitable for the following frame types:

              

The SH-2 coupling pin is a component of the Andersen Shopper Manufaktur Bike & Easy system. With the help of the SH-2 coupling pin, the shopper can be attached to the matching coupling. The coupling pin is attached to the shopper handle and can also remain attached to the shopper during normal use without a bicycle. The shopper can be attached to or detached from the bicycle in a few simple steps. In this way, the shopper can be used either with or without the bicycle, as desired.

Please note: To attach the shopper to the bicycle, a coupling is required in addition to the coupling pin.

 

    

  

To The Luggage Carrier

Coupling G1-PullEasy®

Together with the matching coupling pin for the shopper, the G1 PullEasy coupling forms the Bike & Easy System from Andersen Shopper Manufaktur. The G1 PullEasy coupling is the counterpart to the coupling pin and is attached to the luggage carrier of the bicycle. The coupling is designed so that the luggage carrier always remains free. This means that in addition to the shopper, other panniers or a child seat can be mounted on the luggage carrier. When the shopper is not in use, it can be easily removed. The G1 coupling can remain on the carrier during this time and is flexibly ready for the next tour with the shopper.

The G1 PullEasy coupling has an integrated lock. This allows the shopper to be connected to the bicycle. An additional integrated diode rear light ensures more safety in road traffic.

To attach the G1 PullEasy hitch to the luggage carrier, the carrier must have a load capacity of at least 25 kg. The G1 PullEasy hitch is suitable for all luggage carriers with a width of 103 to 170 mm. The struts require a diameter of 8 to 16 mm. 

The G1 PullEasy hitch can also be fitted to e-bikes or Pelecs (up to 25 km/h) where the battery is mounted under the luggage carrier. 

Please note: To attach the shopper to the bicycle, a coupling pin is required in addition to the coupling.

 

Coupling A1-EasySnap®

Together with the matching coupling pin for the shopper, the A1 Easy Snap coupling forms the Bike & Easy System from Andersen Shopper Manufaktur. The A1 Easy Snap coupling is the counterpart to the coupling pin and is attached to the luggage carrier of the bicycle. The coupling is designed so that the luggage carrier always remains free. This means that in addition to the shopper, other panniers or a child seat can be mounted on the carrier. When the shopper is not in use, it can be easily removed. The A1 Easy Snap coupling can remain on the carrier during this time and is flexibly ready for the next tour with the shopper.

The A1 Easy Snap coupling with integrated lock is suitable for the PLETSCHER carrier systems

Vario
Genius
Genius Plus
Athlete System
Athlete Pumpe
 

The A1 Easy Snap coupling weighs 0.6 kg.

Please note: To attach the shopper to the bicycle, a coupling pin is required in addition to the coupling.

  

To The Seat Strut

Coupling R1 Big Easy®

 

 

Together with the coupling pin that matches the shopper, the R1 BigEasy coupling forms the Bike & Easy System from Andersen Shopper Manufaktur. The R1 BigEasy coupling is the counterpart to the coupling pin and is attached to the seat stay of the bicycle. By attaching the coupling to the bicycle frame, this coupling is particularly suitable for bicycles without a luggage carrier. However, even for bicycles with a luggage carrier, the G1 BigEasy hitch is also designed so that the luggage carrier always remains free. This means that in addition to the shopper, other panniers or a child seat can be mounted on the carrier. When the shopper is not in use, it can be easily removed. The R1 BigEasy hitch can remain on the bike during this time and is flexibly ready for the next tour with the shopper.

To attach the G1 PullEasy hitch to the bicycle frame, the seat stay must have a diameter of 10 to 22 mm. A luggage carrier is not necessary for attaching the R1 BigEasy coupling.  

Please note: To attach the shopper to the bicycle, a coupling pin is required in addition to the coupling.

The G1 PullEasy coupling can be attached to almost all common bicycles.

  

What are you looking for?

Your Basket